scroll down

T-1550

T-1550 is F.I.T.'s highest-strength PTFE-coated fiberglass membrane, weighing 1600g/sqm with tensile strength of 10000/9000 N/5cm and a LEED Heat Island Effect of 99%. Designed for tensile shading structures and roofs. ISO 9001 certified, 15-year warranty.


Tensile Shading Structures Tensile Roofs ISO 9001 15-Year Warranty

Main Application

  • Tensile shading structures
  • Tensile roofs

Major Advantages

  • Long term aesthetics (Tropical climate compatibility)
  • High natural light input
  • High fire resistance

PropertyTechnical Value (Type V)Standard
CoatingPTFE—
YarnGlass yarn EC 6μ—
Weight1600 g/sqmEN ISO 2286-2
Width400 cm—
Tensile strength (warp/weft)10000/9000 N/5cmEN ISO 1421
Tear resistance (warp/weft)900/900 NDIN 53.363
Adhesion100 N/5cmEN ISO 2411

♦ The technical data here are average values with +/- 5% tolerance.


PropertyTechnical ValueStandard
Flame retardancy ratingB1DIN 4102-1
Flame retardancy ratingClass AASTM E 84
Flame retardancy ratingClass AASTM E 108
Flame retardancy ratingPassASTM E 136

♦ Other fire certificates available on demand.


PropertyTechnical ValueStandard
Thickness1.0 mm ±0.1mm—
Standard format length~200 m—
Visible Light Transmittance (Tv)8%EN 410
Visible Light Reflexion (Rv)85%EN 410
Solar Transmittance (Ts)7%EN 410
Solar Reflexion (Rs)80%EN 410
Solar Factor (g)10%EN 410
Heat transfer coefficient (vertical/horizontal)U= 4.8 / 5.6 W/㎡.KDIN EN ISO 6946
Emissivity90%DIN EN ISO 6946
UV transmittance (T uv)<1%EN 410
LEED Heat Island Effect99%ASTM E 1980-01 (Approach II)
Certifications: ISO 9001 | Warranty: 15-Year Warranty
The buyer of our products is fully responsible for their application and their transformation with regard to any possible third party.
The buyer of our products is responsible for their implementation and installation according to the standards, workmanship and safety regulations in force in destination countries.
For information on our contractual warranty, please refer to the relevant terms and conditions.
The values quoted above represent results of tests performed in compliance with common design practices and are provided for information only to enable customers to make the best use of our products.
Our products are subject to changes based on technical advances and we reserve the right to modify their characteristics at any time.
The buyer of our products is responsible for checking the validity of the above data.